|
MATERIAL
SAFETY DATA SHEET
PRODUCT IDENTIFICATION
Product
Name: ChloraPal
Date: January 3, 2006
Product Use: Product enhances the effectiveness of chlorine on coliform
bacteria.
Formula:
Buffered, organic, slightly acidic, aqueous solution of electrolytes.
DOT
Classification: Not regulated as a hazardous material by DOT or IMO.
Manufacturer:
Design Water Technologies
5920 Covington Road
Shorewood, MN 55331
Phone: #952-474-4657
COMPONENT INFORMATION
COMPONENTS:
AMT. (%)
The
balance of the components are not listed or considered hazardous in 29CFR
1910.1200 or other pertinent sections of OSHA Regulations and comprise
proprietary information.
EMERGENCY RESPONSE INFORMATION
FIRST
AID PROCEDURES:
This product is an mild acid base. May cause eye burns. Immediately flush
eyes with water for at least 15 minutes and get medical attention.
May
cause skin irritation with prolonged contact. Wash skin surface with mild
soap and water.
FIRE
FIGHTING INFORMATION:
Use self-contained breathing apparatus.
As
with any acid, contact with metals may produce flammable hydrogen gas.
Use
extinguishing media appropriate for surrounding fire.
SPILL
OR LEAK HANDLING INFORMATION:
Personal Protection: Must be appropriate to handle a spill. See Personal
Protection Measures Section.
Neutralize
spills with pH Neutralize, lime or soda ash; flush spill area
with plenty of water.
Procedures:
Keep spectators away. Treat as an acid material. Contain spill with inert
material (sand, earth, absorbable material). Transfer diking material
to suitable container for recovery or disposal. Material may be diluted
and rinsed down a sanitary sewer system to a municipal wastewater plant.
If quantities in excess of 500 gallons are rinsed to a sewer, the district
should be notified of possible pH upset to the plant.
HAZARD
INFORMATION
HEALTH
EFFECTS:
The formulation is only mildly corrosive to skin and eyes and is not known
to be a skin sensitizer. Toxic effects described in animals from exposure
by inhalation or ingestion include corrosion of mucosal surfaces, kidney
effects, liver effects, and increased oxylate production. Tests of individual
constituents in bacterial or mammalian cell cultures gave no mutagenic
activity.
Human
health effects of overexposure by skin or eye contact may initially include:
skin irritation with some discomfort or rash, or eye irritation with discomfort,
tearing, or blurring of vision. Higher exposures may lead to these effects:
skin burns or ulceration, or eye corrosion with corneal or conjunctival
ulceration.
Human
health effects of over exposure by inhalation may include irritation or
corrosion of mucous membranes with upper and lower respirator irritation.
Human health effects of overexposure by ingestion may include corrosion
of mucous membranes with stomach discomfort, nausea, and prostration.
Significant skin permeation after contact appears unlikely. There are
no reports of human sensitization.
REACTIVITY
INFORMATION:
Stability: Stable [ X ] Unstable [ ]
Incompatibility: metals, oxidizing agents such as nitric acid, cyanide,
sulfides.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide.
Hazardous Polymerization will not occur.
ACCIDENT PREVENTION INFORMATION
PERSONAL
PROTECTION MEASURES:
Eye Protection: Wear chemical splash goggles (ANSI Z871) or approved equivalent.
Hand
Protection: Wear neoprene gloves or approved chemical protective gloves
suitable for use with acids.
FACILITY
CONTROL MEASURES:
Ventilation: Keep in well ventilated areas. Keep package tightly closed.
Store above 32 degrees F. (0 degrees C)
Storage:
Product should not be stored with or near strong caustic or oxidizing
agents.
Other
Protective Equipment: Eye wash facility should be present where product
is stored
or utilized.
SUPPLEMENTAL
INFORMATION
PHYSICAL
PROPERTIES:
Appearance: Clear Color: Slightly Yellow
State: Liquid Solubility in Water: Complete
Vapor Pressure: Vapor is water Vapor Density: 1.0, vapor is water.
Evaporation Rate: N/A Specific Gravity: 1.125
Boiling Point: 243 degrees F Freezing Point: 32 degrees F (clouding)
pH: 2.3.
WASTE
DISPOSAL:
Comply with Federal, State, and Local regulations. If approved, may be
neutralized and flushed to wastewater treatment plant.
REGULATORY INFORMATION
Certified
since April 1, 2000 under ANSI/NSF Standard 60, which covers the health
effects of water treatment chemicals.
DOT
Proper Shipping:
Not regulated as a hazardous material by the US Dept. of Transportation
(DOT) 49CFR 172.101 Hazardous Material Table.
RCRA
Status:
Not a hazardous waste under RCRA, 40CFR 261. No reportable quantities.
SARA/TITLE
lll-CERCLA List:
This
product does not contain a CERCLA listed hazardous substance
for emergency release notification under Sec. 304 (40CFR 302).
SARA/TITLE
lll-Toxic Chemicals List:
This product does not contain a toxic chemical for routine annual toxic
chemical release reporting under Sec. 313 (40CFR 372).
TSCA
Inventory Status:
Chemical components are listed on TSCA inventory.
California
Proposition 65:
This product does not contain any chemicals currently on the California
list of known carcinogens and reproductive toxins.
Design Water Technologies supplies this data
sheet for your information, consideration, and investigation. The information
and recommendations contained have been compiled from sources believed
to be reliable. No warranty, guarantee, or representation is made by DWT
as to the absolute correctness or efficiency of any representation contained
in this and other MSDS nor assumes any responsibility in connection; nor
can it be assumed that all acceptable safety measures are contained in
this and other MSDS, or that other or additional measures may not be
required under particular or exceptional conditions/circumstances. You
should satisfy yourself that you have all current data relevant to your
particular use.
Close
this screen to return to the Product Page.
|